multi charger

[LARRY WHETTONParticipant @larrywhetton68737]

Hi all,

looking to bye a multi battery charger,

my imax 6 as just packed up looking for new replacement any ideas please and a good deal ., cheers Larry..

[LARRY WHETTONParticipant @larrywhetton68737]

[Dave MilbournParticipant @davemilbourn48782]

Larry
Dreaming of this Imax X200…….. **LINK** but the Turnigy Accucel 6 is a nice little job for about a quarter of the price – although you will need a 12v power supply for it.
For a mains charger the Graupner Multilader 7E takes some beating for good value and all-round usefulness **LINK**
Dave M

[LARRY WHETTONParticipant @larrywhetton68737]

Thank you Dave for info ,

Turnigy looks like fitting the bill . cheers Larry…….

[Dave MilbournParticipant @davemilbourn48782]

Larry
Hold on until next week. If I can tease an Imax X200 out of Iain Lewis at trade price then there will be a Turnigy Accucel with little previous use looking for a new home……………..
Dave

[LARRY WHETTONParticipant @larrywhetton68737]

Hi

Thank you again, please enjoy Blackpool , one the best shows to go to ,

can not travel at the moment, a health item, shame its the only show my other half enjoys ,

i think the lights / shops/ fish and chips as something to do with it……

cheers Larry…….

[MzeeParticipant @mzee]

Posted by Dave Milbourn on 15/10/2013 14:13:34:

Larry
Dreaming of this Imax X200…….. **LINK** but the Turnigy Accucel 6 is a nice little job for about a quarter of the price – although you will need a 12v power supply for it.
For a mains charger the Graupner Multilader 7E takes some beating for good value and all-round usefulness **LINK**
Dave M

I second the Turnigy Dave recommends – I use mine for LiPos and NiMh packs and never had a problem. 12V power supply no problem – there are loads of details on converting a computer power supply unit via Google. I acquired one from a computer repair outfit for free and it only cost me a few cents for terminals etc and a car tail light bulb (in place of the loading resistor)!

[Dave MilbournParticipant @davemilbourn48782]

X200 is on order!! Drooling starts on Saturday morning. Will contact you after the show, Larry.
DM

[Author]

Posts