Hi thanks for letting me join in in the process of building a norfolk wherry will post photos soon

Norfolk wherry build

Edited By Colin Bishop on 03/10/2020 08:58:20

the wood i ordered did not arrive so ordered from another supplier which arrived today but i did make a start on the mast

Edited By Colin Bishop on 03/10/2020 08:59:56

i was thinking that as well so will need to add / hang something from the humpy bit on the bottom so over the next few weeks is planking planking and more planking steamer built

found some wood and brass working pullies 7 x 5 x 3mm . now added extra fittings now looking for 2 single working wood and brass ones about 7mm

save picture to your PC then load into micro soft print go to custom settings in printer setup print at 4 pages x 4 pages this will print 16 pages to about 1/24th scale

I have never found bigger scale drawing this how i did mine

test fitting subdeck will be sanded to fit hull when the time to fit comes around

After a 2nd float all's well in that department now fitting the workey things on the inside, sub deck still to be trimmed to correct size inside and outside then i can start on the superstructure

After a 2nd float all's well in that department now fitting the workey things on the inside, sub deck still to be trimmed to correct size inside and outside then i can start on the superstructure

testing keel with 2lb lead added sailed ok