Editor change again

This topic is empty.

Viewing 19 posts - 1 through 19 (of 19 total)

Author

Posts
5 May 2018 at 14:36 #4492
terry small 1
Participant
@terrysmall1
Advert

5 May 2018 at 14:36 #76913
terry small 1
Participant
@terrysmall1
Graham Ashby no longer editor what is occurring here.
5 May 2018 at 15:32 #76914
Graham Ashby 1
Participant
@grahamashby1
Hi Terry,

It's a story that I can't relay in its entirety for reasons which you'll understand very shortly however my brother David, who edits RCM&E magazine, suffered a minor stroke from which he made a full recovery. However, quite understandably he's decided to step off the publishing merry-go-round and take life a little easier. This left the company with an editorial position that needed filling and my background made me the best fit. This, added to the fact that MB's new editor, Martyn Chorlton, is equally as good a fit for Model Boats but not so RCM&E. So, no plotting, subterfuge or conspiracy involved, just the necessary realignment of a few editorial positions. Model Boats, I can assure you, is in safe and capable hands. Mind you, I will genuinely miss you all and the magazine. I've thoroughly enjoyed my all-to short tenure. It's been great fun.

Kind regards

Graham

Edited By Graham Ashby (Editor) on 05/05/2018 15:36:36
5 May 2018 at 18:20 #76915
Paul T
Participant
@pault84577
Hi Graham

It is good to hear that David is recovered and I can fully appreciate his decision to step back from the 'coal face'. Its a shame that we have to go through another set of editorial changes but I am sure that all of the Model Boat fraternity wish you well in your move and I know that with Martyn we will be in safe hands.

Meanwhile will you ever finish off that little runabout?

All the best

Paul
5 May 2018 at 18:53 #76916
Graham Ashby 1
Participant
@grahamashby1
Hi Paul,

Thank you very much. Editing Model Boats has rekindled my interest to the point that I shall definitely continue with the runabout build and finish the series of articles. I also have the Bellissima lined up to follow and I'm enjoying the yacht racing too much to stop. So, I'll be around for some time yet and Martin has kindly offered to run two or three of the articles I'd planned to scribble.

Kind regards

Graham
5 May 2018 at 18:56 #76917
terry small 1
Participant
@terrysmall1
Graham

Fully understand. I read both magazines and very glad all is in safe hands. Your brother looks so well in the pictures. Good luck to you and David. Modelboats current format looks good. Paul and yourself moved a great read forward and hope the new man at the helm builds on it. Many thanks.
5 May 2018 at 19:06 #76918
ashley needham
Participant
@ashleyneedham69188
Graham. Good luck with your new mag, and to David as well.

We will look forward to crossing swords with the new man soon!!

Ashley
5 May 2018 at 19:22 #76919
Graham Ashby 1
Participant
@grahamashby1
Terry, thank you very much. David, thankfully, is absolutely fine, Model Boats is in great shape and in good hands with Martyn aboard and since model aeroplane building and flying is another of my favourite things that should be pretty safe too
5 May 2018 at 19:24 #76920
Graham Ashby 1
Participant
@grahamashby1
Thanks Ashley, I'll pass the good wishes of all you folk to David. Martyn will be with you all pretty soon.

Kind regards

Graham
5 May 2018 at 19:35 #76921
Colin Bishop
Moderator
@colinbishop34627
Yes, it's a shame to see Graham moving on after having made such an excellent start but I'm sure Martyn will build on this and will have our support in carrying on what Graham has started.

Colin
5 May 2018 at 20:50 #76928
Graham Ashby 1
Participant
@grahamashby1
Thanks Colin, Martyn and I have already had the first of two or three handover meetings and he's very much on the same page as me. We'll be doing everything we can to make the transition as seamless as possible.
5 May 2018 at 21:03 #76929
Tony Hadley
Participant
@tonyhadley
Wishing you every success for the future, Graham.

As you have probably guessed, I like Vic Smeed's designs. Perhaps I should think about building his little flying boat design 'Damsel Fly'. I am ok with aircraft, but boats take a preference.

The youtube clip is an enlarged r/c version from Australia

**LINK**
5 May 2018 at 21:31 #76930
Graham Ashby 1
Participant
@grahamashby1
Thank you Tony, much appreciated.

Just been watching the Damsel Fly video. Lovely little model. I'm a huge flying boat fan simply because they combine my two favourite hobbies. Whenever I go float-flying I always take a boat as well, not least because they make great recovery vessels!

Vic was my kind-of chap, he loved all forms of modelling and seemed to get inspired by it all. Very pleased to say I met him a few times in my early publishing days.

Kind regards

Graham

Edited By Graham Ashby (Editor) on 05/05/2018 21:31:31

Edited By Graham Ashby (Editor) on 05/05/2018 21:31:49
5 May 2018 at 23:10 #76931
Dave Milbourn
Participant
@davemilbourn48782
Good luck, Graham, and thanks for the few issues you edited. I look forward to seeing that little speedboat finished and on the water.

Dave M
6 May 2018 at 00:11 #76932
Graham Ashby 1
Participant
@grahamashby1
Thank you Dave, it was genuinely a pleasure. As for the Sea Breeze, I'm not touching an aeroplane until she's finished!
6 May 2018 at 08:12 #76933
Bob Wilson
Participant
@bobwilson59101
Graham,

I have just sent you a PM.

Bob
6 May 2018 at 12:49 #76939
Eddie Lancaster
Participant
@eddielancaster
Hi. Graham,I would just like to add my best wishes to you and David, and to thank you for your welcome and kind comments on this forum.

All the best for the future.

Eddie.
6 May 2018 at 19:10 #76945
Graham Ashby 1
Participant
@grahamashby1
Hi Bob, seen it and replied
6 May 2018 at 19:14 #76946
Graham Ashby 1
Participant
@grahamashby1
Thank you Eddie, very kind. I saw David today (at the fl**ng field) and passed on all the good wishes.

As for the forum, I've enjoyed it and will definitely continue to post as and when I can.

Kind regards

Graham
Author

Posts