Timbers

[S MParticipant @sm83187]

Today saw several neighbours logging for their winter stockpile and they used well seasoned timber I have in stock, among this was hornbeam and willow and as I have some miniature cutting equipment I cut some stock items for future use. Among this stash were the standard size timber profiles and sheet which were cut and planed down to their final size.

My question is this, has anyone any experience of using hormbeam and willow for modelling work, and what are your experiences?

[S MParticipant @sm83187]

Anyone Got Experience Of These

[Paul TParticipant @pault84577]

Hornbeam is a hardwood and quite difficult to work, there are five main species of willow all of which produce an easily worked and very supple timber, ideal for stringers, coamings and other timber pieces that involve bending.

[Martin Field 1Participant @martinfield1]

I made a base for one of my Rivas from Hornbeam. It looked wonderful and needed only waxing to finish it. Willow ,I haven't used, but assume it's fine as cricket bat makers use it.

Test it for gluing and staining first.

Martin

[Byron Rees…(Ron)Participant @byronrees-ron]

SM. and all.

Hornbeam is a hardwood and is of the same genus as Birch, which we use in plywood. Some people mistake its white and very close grained appearence as being Beech.

It is regarded as quite difficult to work with but historically was used to make the teeth for cogs in Windmills, it also has found uses in cutting boards, soles/frames for old woodwork planes, the action parts like hammers and frames in pianos as well as the soles for clogs among other things.

Its whiteness and hardness would make it useful as a decorative inlay but you would need very good sharp tools to machine it and they will blunt quite quickly. It can be waxed or oiled but if you wanted to stain it it might be better to use an alternative.

It can be turned on a lathe and would make ideal rolling pins, dowels etc.

Hope this helps……………PS Willow can indeed be used for stringers and very good it is too, make sure its fully dried.

Cheers…..RON.

[S MParticipant @sm83187]

Thank you Ron, so it needs nothing special when gluing other than good glue, unlike oak which has to have its oils cleaned before bonding.

[Author]

Posts