1/48th scale Hms Iveston build

1/48th scale Hms Iveston build

Home Forums Scratch build 1/48th scale Hms Iveston build

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #50567
    Andrew Crouch
    Participant
      @andrewcrouch12577

      Hi everyone I've only just joined your forum and need immediate help if you can.

      i've started to scratch build Hms Iveston and although the plans I have are good there is not much detail for fittings,I read that some of the build features are covered in September 1992 issue of model boats.

      back issues of this seem very rare…so my question is does any one have this issue that would be willing to photo copy the section covering Hms Iveston?

      i of course would be willing to pay for the cost of each copy and the postage.

      In advance many thanks for your help.

      #6964
      Andrew Crouch
      Participant
        @andrewcrouch12577

        Model boat magazine sept 1992

        #50570
        Colin Bishop
        Moderator
          @colinbishop34627

          Hi Andrew,

          Welcome to the forum!

          Dave Abbott's Iveston article was republished in the 2012 Plan Features Special issue of Model Boats. Back issues may no longer be available from MyTimeMedia but it should be easier to get hold of a copy of this than the original 1992 issue.

          Colin

          #50573
          Paul Freshney
          Participant
            @paulfreshney24971

            Is on the  MyHobbyStore website in 'Clearance' at £2.50.

             

            Paul.

            Edited By Paul Freshney Editor of Model Boats on 22/07/2014 11:16:46

            #50583
            Andrew Crouch
            Participant
              @andrewcrouch12577

              Good evening everybody, many thanks for your help in my quest for information on Hms Iveston,

              i have just ordered a copy of said magazine, which will hopefully get me on my way.

              When I get a bit more time I would like to post on the forum a few photos of my maiden boat build which is an Imara tug from caldercraft models.

              Once again many thanks to Paul & Colin.

            Viewing 5 posts - 1 through 5 (of 5 total)
            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

            Code of conduct | Forum Help/FAQs

            Latest Replies

            Home Forums Scratch build Topics

            Viewing 25 topics - 1 through 25 (of 25 total)
            Viewing 25 topics - 1 through 25 (of 25 total)

            View full reply list.