Submarine hardware/electronics

This topic is empty.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
7 August 2010 at 17:05 #28001
David Bothwell 2
Participant
@davidbothwell2
As per the title, any unused electronics for submarines, or other miscellaneos hardware, as long as it is reasonably priced,
Advert

7 August 2010 at 17:05 #8800
David Bothwell 2
Participant
@davidbothwell2
10 August 2010 at 17:04 #28037
Len Ochiltree
Participant
@lenochiltree67043
Wanted ?
10 August 2010 at 17:16 #28038
David Bothwell 2
Participant
@davidbothwell2
Hello Len, could be interested in anything, prefer a “swap” for my Robbe PT boat, but cash would also be on the table. depth control, failsafe, dive tanks or parts for static dive, my e-mail is [email protected] if that is of use?
11 August 2010 at 12:20 #28049
David Bothwell 2
Participant
@davidbothwell2
Hi Len, Don’t understand , have you any parts? or should my want advert have been more specific? Took your earlie advice and got a Gato! Many thanks for the good advice
12 August 2010 at 16:49 #28068
Len Ochiltree
Participant
@lenochiltree67043
Sorry no parts, yes you were a bit vague, I to have a Gato and am awaiting inspiration.

Len.
12 August 2010 at 20:30 #28073
David Bothwell 2
Participant
@davidbothwell2
I have the inspiration, also a length of clear plastic tube that fits the hull, just debating which dive system to use, nice to be spoilt for choice, preferred is cylinders, but other projects beckon!
12 August 2010 at 21:04 #28075
60watt
Participant
@60watt
David,did you follow Ashley Needham’s point about how he would do things differently if he did his Oberon over again?http://www.modelboats.co.uk/forums/postings.asp?th=39666

If the Gato superstructure plastic is not too thick you might get away without a tank.

It would make life simpler.

Edited By 60watt on 12/08/2010 21:04:45
13 August 2010 at 20:31 #28078
David Bothwell 2
Participant
@davidbothwell2
Thanks for the tip, sorry if response is a little slow. I will read it and consider options D
13 August 2010 at 20:31 #28079
David Bothwell 2
Participant
@davidbothwell2
Thanks for the tip, sorry if response is a little slow. I will read it and consider options D

sorry told me it had not posted but it always does!

Edited By David Bothwell 2 on 13/08/2010 20:33:13
13 August 2010 at 20:40 #28080
60watt
Participant
@60watt
I just want someone to figure out how to measure how much there is above the waterline and come back with a figure.
14 August 2010 at 20:41 #28089
ashley needham
Participant
@ashleyneedham69188
I went for dynamic diving as it`s so much easier, however it all depends what you want to do. An easy system is available (see my previous postings) to get a better “more under than on top” sub.

I like impressing the crowds at our pond-side (there are normally 3 or 4 standing about) and so a dynamic diver was adequate to demonstrate the submersible qualities i had achieved.

Ashley
15 August 2010 at 12:32 #28093
David Bothwell 2
Participant
@davidbothwell2
Thanks Ashley I will take another look at your posts, I have material to do cylinders or air system it is just room really Revell Gato
Author

Posts