My 1st lifeboat

This topic is empty.

Viewing 20 posts - 1 through 20 (of 20 total)

Author

Posts
24 January 2011 at 19:27 #29585
Phil Winks 1
Participant
@philwinks1
1st let me give thanks to Neil for the base mouldings for this model.
For hin it is simply an accessorie for his current life boat build.
For me it is my 1st lifeboat in its own right.
The intention is to make it functionall and I believe I have sorted the details of the radio gear bty etc. Even the problem of the servo to steer it looks much easier than I at 1st thought. Basically I intend to mount the servo inside the outboard cover, with the actuating arm out through the side and a fine rod running to the pivot point of the mount, so the outboard will still lift into the stowage position. the servo control wire and motor power leads will run under, what I believe are, the fuel tanks that run up the inside of the sponsons. to hide the rest of the gear away I’ve chosen to model D-719 as this one has a hard stowage locker under the forwd spray sheet, this will allow ample space for the electronics.
The only other issue is the bty’s and I have a source of LiPo cells that are only 5mm thick and so hopefully I’ll get them under a false deck

Now for the pics so far!
1st the sponsons cut out and glued

then the hull bottom and inner sub deck fitted

and then the filler to smooth the joints out

and all rubbed down

Now she needs a little more filler (fine grade) and then its all the belting and patches etc and the f’rwd locker and spray sheet before a coat of paint.

Phil
Advert

24 January 2011 at 19:27 #6696
Phil Winks 1
Participant
@philwinks1
A “D” class RIB (D719) from a part kit from Neil Howard pritchard
24 January 2011 at 20:15 #29587
Bob Abell 2
Participant
@bobabell2
Hello Phil

Just watching in the wings

Don`t forget the crew!

Bob
24 January 2011 at 20:23 #29589
Phil Winks 1
Participant
@philwinks1
Thats a way away yet Bob but yes its in the back of my mind.

Phil
25 January 2011 at 08:26 #29592
Bob Abell 2
Participant
@bobabell2
Hi Phil

It may be a little late now, but you could have scaled the model up and built it with plastic tubing?………That would have been quite impressive!

Next time, eh?

Bob
25 January 2011 at 08:36 #29593
neil hp
Participant
@neilhp
true model lifeboaters only build at 1:12 scale Bob,

ohh gawd, whatch the flack fly now, lol……..I don’t care, he he!

Edited By neil howard-pritchard on 25/01/2011 08:37:34
25 January 2011 at 08:48 #29594
Bob Abell 2
Participant
@bobabell2
Hi Neil

Just thought, the model could easily be constructed from B&Q plastic tubing…..Especially since Phil has something to copy!

As you know……I LIKE BIG UNS!

The only good thing about 1/12 scale is all the dolls house stuff that is availabell!

Bob
25 January 2011 at 08:55 #29595
neil hp
Participant
@neilhp
I made the plug for the vac forms from waste pipe to begin with……..found an amazing solvent to stick it all …..glued and set within seconds, much the same as plastiweld does with HIPs……..but can’t find the tin so forget what it’s called.

Then I filled it with resin so that it wouldn’t fall apart, lol,

but yes you are right…….can I see a future wave rider coming from your slipway,???
25 January 2011 at 09:46 #29596
Bob Abell 2
Participant
@bobabell2
Thanks Neil

Can`t get going on a model at the moment……but thinking about a kit this time….

But which one?…….Really spoilt for choice!

Bob
25 January 2011 at 12:43 #29601
neil hp
Participant
@neilhp
what do you fancy building bob…….something big i know..

have you thought [ excellent but expensive]of mountfleet models largest trawler…..St Nectan and asking for their Sir lancelot set of Armed trawler fittings, and turn it into a lovely big armed trawler…….she would make a magnificent model.

neil.
25 January 2011 at 12:44 #29602
neil hp
Participant
@neilhp
sorry to digress from your original post, phill…..won’t do it again, slapped my wrist.

neil.
25 January 2011 at 12:50 #29603
Bob Abell 2
Participant
@bobabell2
To digress even further…..I keep coming back to the Glasgow paddle steamer, with a steam engine!

Sorry Phil………Got my legs slapped this time!

Bob
25 January 2011 at 17:44 #29608
Phil Winks 1
Participant
@philwinks1
No worries lads its not as if your posts are either getting in the way or on a subject other than model boats. I’f your looking for a steam engine Bob try going to “Miskin models” he’s on the web and has a cracking 2 cylinder slide valve kit ready machined. all self starting etc and runs a dream and his price is pretty good too. He fetched one to our little show in wellington last year.

Phil
29 January 2011 at 14:22 #29653
Phil Winks 1
Participant
@philwinks1
just a little more progress so far today the pic says it all really apart from the fact that the prop has been changed as the original was overloading the motor. this mod has increased thrust and reduced current draw

Phil
29 January 2011 at 16:24 #29656
Bob Abell 2
Participant
@bobabell2
Nice little model, Phil

How about an animated driver, to man the motor?

Bob
29 January 2011 at 16:55 #29657
Phil Winks 1
Participant
@philwinks1
Yhank you Bob.

Animated cox now I hadn’t thought of that! I guess I need to see whos got what when it comes to crew it may be possible for me to do that though.

Phil
29 January 2011 at 20:59 #29661
Phil Winks 1
Participant
@philwinks1
another bit done this afternoon the longitudinal side belting this is from the pictures I’ve got a very prominent feature and hopefully once its painted it will look reasonably realistic

Phil
20 February 2011 at 16:08 #29897
Phil Winks 1
Participant
@philwinks1
It’s taken me nearly 3 weeks but finally she’s close to being painted. just the rings for the grab lines to fit and its of to halfords for some VW brilliant orange.

The steering is affected by a servo hidden in the top of the outboard and all the control electronics (including an esc thats not as big as a pound coin) are hidden with a diminutive 2s1p 800mah lipo in the stowage locker.

Phil
21 February 2011 at 10:22 #29903
Bob Abell 2
Participant
@bobabell2
Hello Phil

Nice model………..I`m a bit surprised you are going to paint it?……..As it looks most realistic as is!

I like the stripes and patches etc

Any sign of a crew member?

Bob
21 February 2011 at 18:10 #29905
Phil Winks 1
Participant
@philwinks1
Thanks Bob the orange is indeed about right but the horizontal rubbing strip, the internal floor, the patches that secure the grab lines and internal fuel tanks, and the lifting handles, should be black.

the stripes around the sponsons are supposed to be orange the same as the main part of the boat and have been added prior to painting to give the relief affect that is present on the real thing.

The spray sheet over the stowage locker should be orange and the door of said locker black. the oblong above that door is the radio. there is a pic of the real thing in my album of this build but the site won’t let me show it in the posts for some reason.

Phil
Author

Posts