LULONGA RIVER BOAT

This topic is empty.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
10 February 2012 at 15:13 #6781
LARRY WHETTON
Participant
@larrywhetton68737
SCRATCH BUILT
Advert

10 February 2012 at 15:13 #33323
LARRY WHETTON
Participant
@larrywhetton68737
Hi ,

Just part finished Lulonga river boat Dave Metcalf plan using vac form hull,

styrene for cabins , ikea blind wheel house and decks all winches and deck

works all scratch built out of bits and pieces.

it is now waiting for paddle wheels and motors and drive chain al a

bit pricey , got to save up , so will post when restart, …..Larry.

stanchions by James Lane Display Models …….

Edited By LARRY WHETTON boatman76 on 10/02/2012 15:20:09
10 February 2012 at 15:22 #33325
Bob Abell 2
Participant
@bobabell2
Hello there, Larry

You`ve made a fine job of Lulonga

That`s true scratch building!

I like the handrails

Bob
10 February 2012 at 15:43 #33327
LARRY WHETTON
Participant
@larrywhetton68737
Thank you Bob,

May be seeking help with wheels, looking at a Graupner set.

and MFA torpedo 500 6/1 gear box , but pulley set i don’t no ./

STANCHIONS are by James Lane…railing is striped cable. …..Larry..
10 February 2012 at 16:14 #33330
LARRY WHETTON
Participant
@larrywhetton68737
A few pictures of the start of build…………….

in the hull picture is early scratch built wheel , but came to heavy and wonky.

i am no engineer, Larry..
5 April 2012 at 19:13 #33871
graham mcrobert 2
Participant
@grahammcrobert2
good looking build so far
1 May 2012 at 20:57 #34243
LARRY WHETTON
Participant
@larrywhetton68737
hi , as any body no the paddles at the right price for my Lulonga,/……Larry..
18 July 2012 at 14:55 #35316
Guido Sambucetti
Participant
@guidosambucetti90794
Hi Larry,

I don´t know if you are still building Lulonga or if you´ve finished her, but I found this information that may be useful: somewhere I found a someone´s comment about having used rc tank gearboxes to drive his own Lulonga, and suggested the Mato Toys company. Under the link "Metal upgrade tank parts" you will find twin drive gearboxes for most of the models they sell. This is an example:

**LINK** version 3:1 Brass gearbox for 1/16 Henglong Tiger 1 tank (short shaft)&cate1=1:16 German Tiger 1 tank&pid=54&cid=&search=

Tamiya also manufactures one, but it´s rather expensive. You can find it on ebay.

**LINK**

I hope this is of help. Cheers!!
18 July 2012 at 15:21 #35317
LARRY WHETTON
Participant
@larrywhetton68737
Hello Guido ,

Thank you for info, tried to both sites , one in china no prices given the other on e bay not to bad but no paypal also dont trust on line buying got stung on a purchased once , but still keep looking …..Larry…
18 July 2012 at 15:45 #35319
Bob Abell 2
Participant
@bobabell2
I'm surprised at you, Larry

Make your own paddles!

Simple ones are easy to make……..A simple bobbin with radial saw cuts and pieces of thin ply glued in?

Or two discs, fretsawed out, with thin ply paddles from 1mm ply…..cut with the wife's scissors

Used screwed rod for the axles, from B&Q with nuts and washers for the drive!

Bob
18 July 2012 at 16:08 #35320
LARRY WHETTON
Participant
@larrywhetton68737
Hello Bob , thank you for build tip will give it try , but still involved with trawler ,

wished i never started the beast…..poor mould and plan . but geting there … thanks Larry..

Edited By LARRY WHETTON boatman76 on 18/07/2012 16:09:20
Author

Posts