Very many thanks Jerry. Now I kow what to look for. Cheers. John

Many thanks Barry. I will try to find a copy..

Thanks very much again Barry. I know where I can lay my hands on that MotorShip article – Southampton Reference library – where I can photcopy the page and then scale it up to the size I want. You have been very helpful.

Yours, John

Barry,

Thank you so much for the copy plans from the RA Sweet article. They have come out quite well on my printer.

I have also this morning blown up the MotorShip plans at Southampton Reference library to give me a l.o.a. of 30″.

I shall be building on an Eskgarth fibreglass hull from Kingston Mouldings. The length to beam ratio is not quite right but I am prepared to put up with that for the sake of saving expense. If I were to make the plug, then split female mould followed by the actual hull it would cost about 5 times as much as the bought-in hull! And my fibre-glass laying up is about 1/10 as good as Kingston. It’s a bit of a cheat but it will please me in the end.

Thanks again.

John

Hello Steve,

Sorry about your loss of QE2 plans.

I will try to use my ageing brains if you will tell me :-

(1) Are you going to make a model of QE2?

(2) Is it going to be a working model?

(3) What size is your model going to be?

I look forward to hearing from you. Are you still in Spain? This matters because of availabilty and postage.

John Nightingale