FAIREY HUNTSMAN

Advert

New Replies

Report Bug

Help/FAQs

FAIREY HUNTSMAN

This topic is empty.

Viewing 23 posts - 1 through 23 (of 23 total)

Author

Posts
29 January 2014 at 09:58 #46683
BRYAN ASTON
Participant
@bryanaston57723
I HAVE NEARLY FINISHED BUILDING A PLASTIC HULLED HUNTSMAN, MY PROBLEM IS SHOULD IT HAVE A RUBBING STRIP TO COVER THE JOIN BETWEEN THE DECK AND THE HULL, I WOULD WELCOME ANY INFO. FROM PREVIOUS BUILDERS OF THIS BOAT. THE MANUFACTURES OF THE KIT DO NOT SUPPLY ONE EVEN THOUGH THE FULL SIZE BOATS HAVE ONE.

REGARDS

BRYAN ASTON
Advert

29 January 2014 at 09:58 #2364
BRYAN ASTON
Participant
@bryanaston57723
RUBBING STRIP
29 January 2014 at 12:02 #46687
LARRY WHETTON
Participant
@larrywhetton68737
BRYAN ,

Dont, shout the answer is yes, cheers Larry…
29 January 2014 at 13:51 #46691
Paul T
Participant
@pault84577
Bryan

Have a look at the rubber seals that are fitted into domestic / industrial doors (ebay is a great place to look) I tend to use half round seals for my rubbing strips.

Paul

ps writing in CAPITALS is considered to be shouting, but don't ask me why.
29 January 2014 at 17:16 #46698
BRYAN ASTON
Participant
@bryanaston57723
Larry and Paul

Thank you for the info ref. the rubbing strip for the Huntsman. Please accept my apologies for the capitals it is just a habit of mine.

Regards

Bryan
4 February 2014 at 17:36 #46894
BRYAN ASTON
Participant
@bryanaston57723
Greetings everybody

I have nearly completed the Huntsman that I have mentioned earlier. Having just fitted the windscreen I notice that some photos on the internet of the Huntsman models have some sort of frame around the windshield does anyone know what is used or where I can obtain the material to make a frame.

All suggestions are most welcome as I am still a complete novice .

Regards bryan
4 February 2014 at 18:53 #46896
Dave Milbourn
Participant
@davemilbourn48782
Bryan
Some modellers go to great lengths to reproduce this frame in metal. Others use a thick plastic tape or cut out styrene strips. The very first Huntsman prototype had a simple, painted 'frame'. From three feet away you'd never guess it wasn't real.
Here's my (much later) 20" Swordsman with a painted screen frame.
Dave M

Edited By Dave Milbourn on 04/02/2014 18:56:57
4 February 2014 at 19:49 #46897
LARRY WHETTON
Participant
@larrywhetton68737
HI ,

I used silver tape as used to seal metal ducting , and pipe duct,

see my picture , a bit of fiddle but worth it …Larry………..
5 February 2014 at 20:03 #46920
ashley needham
Participant
@ashleyneedham69188
Dave. No drivers?? no glam ships assistants? Ashley
6 February 2014 at 14:28 #46934
Paul T
Participant
@pault84577
Bryan

You could use some thin pinstripe tape, the sort that the go faster boys put on their cars.

Ashley

'No drivers?? no glam ships assistants' You have to be a bigshot website editor for that kind of thing.
6 February 2014 at 14:32 #46935
Dave Milbourn
Participant
@davemilbourn48782
Posted by ashley needham on 05/02/2014 20:03:15:

Dave. No drivers?? no glam ships assistants? Ashley

They were camera-shy.

DM
6 February 2014 at 17:18 #46940
BRYAN ASTON
Participant
@bryanaston57723
Greetings Dave, Ashley & Paul

Many thanks for your suggestions ref. windshield frame all of which make sense, I now have to decide which one to use, decision, decisions decisions. I will see about the glam. assistants. Any idea where I get them?

once again thanks

Bryan
6 February 2014 at 17:41 #46941
LARRY WHETTON
Participant
@larrywhetton68737
Se how detail looks on the water , worth the effort ……………Larry…
6 February 2014 at 19:23 #46944
ashley needham
Participant
@ashleyneedham69188
I have been looking for glam assistants for ages.

How big a glam do you need?? The glams on my Fantome turned out to be 6" PIPPA dolls (identified by the jumper the driver was wearing on the boat box art…this is PETE, Pippa`s boyfriend <snigger snigger&gt of course long out of print, dolls in this size (dolls house dolls are useless)and I managed to find some Pippa copies on Ebay, and then a couple of originals at a toy fair. COULD have cost almost as much as the boat !!!

Ashley
12 February 2014 at 08:31 #47076
BRYAN ASTON
Participant
@bryanaston57723
Greetings everyone

Its me again , anybody know how to remove a Superglue fingerprint from the windshield of a Huntmaster.

Regards

Messy fingers

Bryan
12 February 2014 at 11:14 #47077
Colin Bishop
Moderator
@colinbishop34627
I don't think you can Bryan as the stuff eats into the plastic.

Colin
12 February 2014 at 13:11 #47081
Paul T
Participant
@pault84577
Buy a new windscreen
12 February 2014 at 13:26 #47082
Dave Milbourn
Participant
@davemilbourn48782
And don't use Superglue. It will fog the plastic. Use Deluxe Materials RC Modellers Glue instead.

Dave M
13 February 2014 at 17:39 #47101
LARRY WHETTON
Participant
@larrywhetton68737
Hello Bryan ,

As Paul and Dave have made two good comments ,

bin the marked screen , give your self a rap on the knuckles ,

and make a new one , first cut a card template to size, on the drawing it shows some fixing tabs

use these to line the screen up do trial fit when happy, cut out a new plastic on to template ,

with tabs dont remove plastic protective film yet, do a test fit , it if happy carry on ,

now just remove film from tabs take your time, using deluxe cockpit glue apply with

a cocktail stick fix front front end tab first a centure line datum ,

when this as dry carry on and fix rear tabs, when it all nice and dry and fine tuned,

remove the protective film , with clean fingers , if you going with screen frame leave on ,

and just remove the small working area , its your choice,….

it is a bit fiddly , but worth it , i would put this model on top of list for a first time scratch

build , i am surprised this not put out as kit,

a very well done to Dave Milourn,

no cad when this was released

so i hope this helps, if not try try again…

ITS WORTH IT Larry ,
14 February 2014 at 17:38 #47123
BRYAN ASTON
Participant
@bryanaston57723
Greetings Dave &Larry

I have ordered the Glue recommended by Dave and I will buy some new material for the screen when I find a supplier. I have also used superglue on some of the windows, a disaster , I am now making new ones out of clear styrene and I leave the film on until the superglue has gone off, seems to work., but I will use the proper adhesive when I get it.

This is only the second boat I have constructed, the Sea Commander was more or less scratch built,The Huntsman was a kit, I am not sure what was easier to build, I never realised how fragile Liteply was.

Regards

Bryan
14 February 2014 at 18:26 #47126
Colin Bishop
Moderator
@colinbishop34627
'Liteply' – the answer is in the name!

Colin
20 February 2014 at 17:30 #47219
BRYAN ASTON
Participant
@bryanaston57723
Greetings everyone

Has anyone got a clue where to buy clear polycarbonate in south Essex so that I can make a new windscreen for a Huntsman to replace the one I messed up. The original shape as supplied in the kit will not fit.

Yours in anticipation

Bryan
11 March 2014 at 17:20 #47529
BRYAN ASTON
Participant
@bryanaston57723
Greetings all

I have given up trying to obtain Polycarbonate in a 1 m length for a new screen but I have copied a design seen on the web, looks good.

Huntsman is almost finished ,but I have had different opinions on the size of the electric motor required to give a decent performance, any suggestions would be appreciated.

Regards

Bryan
Author

Posts