12in prop shafts,& 4 bladed props +motors

[WullieParticipant @wullie]

[WullieParticipant @wullie]

Hi all,i,m looking for 2 x 12in x 4mm prop shafts that are only threaded on one end,there for my Revell 1/72 Gato +,2 x 400 motors that arereasonably priced any help would be much appreciated, I also noticed on the S-boot topic a mention of a supplier, Antics,but can,t seem to locate where there at,

 

Wullie

 

 

[ashley needhamParticipant @ashleyneedham69188]

Surf, surf and then surf a bit more. Howes are good, Cornwall model boats..there are loads of others. Or get a nice set from G Sitek. Not the cheapest but very nicely done. Try 380`s from Maplins. Cheap, not quite as powerful as say a Graupner speed 400 but almost. ready suppressed and with leads soldered on. SHG  plastic couplings are very cheap and fairly short, slightly noisy but not a problem on a sub i imagine. Ashley

[Geoff BirdParticipant @geoffbird11926]

Hello Folks

If a receiver has a BEC is it ok to not use it and power it with separate batteries.

Geoff 

[neil hpParticipant @neilhp]

yes.

[Author]

Posts