Yorkshire Belle

[Bernard AllenParticipant @bernardallen88612]

Hello,

In my October issue of the magazine, page 10 starts off with a build review of this boat.

On page 12 photo No.8 clearly shows the rudder to servo linkage and I am trying to source a supplier of this type of linkage to use in place of a bent wire or indeed a "Z" shape.

Look forward to a response on this. Regards CERES.

[Paul Freshney 2Participant @paulfreshney2]

It is standard aircraft type ball and socket connectors with the sockets screwed onto the end of a threaded rod. Any model aircraft accessories supplier or decent model shop should be able to assist if you have one near to you. The ball and sockets come in various forms, but all do the same job. The connecting rod can be just a piece of brass or steel rod, threaded at the ends or you can buy a threaded end piece that is soldered to the suitable length of rod avoiding the need to cut a tread. Expo Drills sell a range of accessories such as these as do other suppliers found at shows.
P. Freshney

[Bernard AllenParticipant @bernardallen88612]

Paul,

Many thanks for this information. I know just the place to go now. Regards Bernard.

[Bernard AllenParticipant @bernardallen88612]

Rudder Linkage to Servo

[Author]

Posts