Help wanted

[Robert PutleyParticipant @robertputley]

Amps outdrives

[Robert PutleyParticipant @robertputley]

I have a pair of amps outdrives. One used, but recently damaged. The other unused, but needs a new prop shaft.

Is anyone able ot offer assistance please?

[Dave MilbournParticipant @davemilbourn48782]

Have you tried Dave Marles at Prestwich Models or Jack Hull at Millpond Models? Both are I/C specialists and may know about Agnew's old stuff.

Dave M

[Robert PutleyParticipant @robertputley]

Hello Dave, Thank you very much for response. Have phoned both of your suggestions. No reply today. I shall try again tomorrow.

[Dave MilbournParticipant @davemilbourn48782]

Robert
There are no specialist boards on this forum which cover the rather exotic machinery you have. However if you joint "the other lot" **LINK** you'll find several such boards under "Dry Dock: Shipyard; Builds and questions", and I know there are some seriously committed folk who contribute to it. You will have to make your own judgement on the replies; some folk on that forum are more prone to voicing an opinion than giving facts!
BTW it would help if you use capitals for AMPS – it helps to avoid questions about the current involved… I think it was Agnew Model Propulsion Systems, but I'm probably wrong.

Dave M

Edited By Dave Milbourn on 05/06/2017 14:51:32

[Dave MilbournParticipant @davemilbourn48782]

Addendum

I just Googled "Agnew Model Propulsion Systems" and got multiple hits. Someone is out there who can help.

DM

[Robert PutleyParticipant @robertputley]

Many thanks Dave,

Shall give all your ideas a shot.

RP

[Author]

Posts