By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Dremel

Digifleet charger output

High voltage

All Topics | Latest Posts

Search for:  in Thread Title in  
Mike White17/08/2007 16:19:00
14 forum posts
2 photos

Hi, Does anybody out there know what the voltage output from a Digifleet Nicad dual output charger should be?.. Both of my 25 year old chargers voltages are around 25volt on the rx and tx connections. My Futaba dual output charger gives 22volt tx and 4.8volt rx. The nicads are all 4.8 and 9.6 packs.



Ian Weston21/08/2007 14:30:00
4 forum posts

I don't know what the oputputs should be but if its any help the offload outputs from my Digifleet XPFM charger are 16.3 volts TX and 15.9 volts Rx. It works fine charging my Fleet gear and I used it last week to charge a 1500 ma/h Tx battery from a Graupner Mc10 I had just bought - it did take a long time though! I'm fairly sure that the power output of the unit is 50 ma.


Mike White21/08/2007 14:51:00
14 forum posts
2 photos

Hi Ian, Thanks for this, I check my voltage meter and replaced the batteries in it, I am now getting a more realistic reading of 15.5 volts which compares favourably with yours.

thanks again


All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Boats? Use our magazine locator link to find your nearest stockist!

Find Model Boats!

Support Our Partners
Premier March
Tony Green Steam
Restorers Wanted
Pendle Boilers
Shopping Partners
Social Media

'Like' us on Facebook

Follow us on Twitter

Pin us on Pinterest

Member Contributions
Distributors of Model Boats for our overseas readers

Make sure you never miss out on the latest news, product reviews and competitions with our free RSS feed

Make your own contribution to the Website

We welcome well written contributions from Website members on almost any aspect of Model Boating with a particular emphasis on practical hints, tips, experience and builds.

In order to maintain a consistent standard and format, all suggestions should first be sent to me by Personal Message for approval in principle. Only a very limited amount of time is available for editing contributions into a suitable format for placing on the website so it is important that the material is well presented, lucid and free from obvious spelling errors. I think it goes without saying that contributions should be illustrated by appropriate photos. I shall be happy to give advice on this.

The Member Contribution area offers space for short informative mini articles which would not normally find a place in Model Boats magazine. It is an opportunity for Website Members to freely share their  expertise and experience but I am afraid that virtue is its own reward as there is no budget to offer more material recompense!

I look forward to receiving your suggestions.

Colin Bishop - Website Editor