By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Dremel

Huntsman 30"

Wooden hull

All Topics | Latest Posts

Search for:  in Thread Title in  
ashley needham25/02/2020 09:53:37
7218 forum posts
169 photos

Harry.The geezer holding his arm out needs a cocktail glass....

Don't forget the detail!


harry smith 126/02/2020 09:28:54
1079 forum posts
1272 photos

Hi Ashley

NO Drink Driving !!!!

The lassie has arm up for one.

Added the chrome trim around the windscreen today.

A bit of DM blink !!!


Nigel Taily 124/04/2020 14:54:52
6 forum posts
10 photos

Harry, What are the blue and white colours? I'm popping over to Halfords to get spray can for my Huntsman 31.

ashley needham24/04/2020 17:25:22
7218 forum posts
169 photos

Ah Harry, you found a girlfriend for DM!

Do something about the tape though, eh??? wink


harry smith 125/04/2020 05:24:34
1079 forum posts
1272 photos

p1010160.jpgp1010159.jpgHi All

An update on the boat, added a chrome stick-on strip for around the windscreen.

It was tested before the lockdown at 65% throttle and had a good turn of speed.

Cornering was dam good as well !!!

Yes Ashley I have removed the tape !!!

Harry Smithp1010158.jpg

Eddie Lancaster25/04/2020 09:18:29
843 forum posts
644 photos

Hi. Harry, very VERY smart, I do like the blue and white colour scheme for this type of boat and that Crome trim is the bee’s knee’s.


Chris Fellows25/04/2020 12:58:15
985 forum posts
643 photos

Blue (two shades where required) and white are the only colours that Faireys should be painted in!


ashley needham25/04/2020 15:12:51
7218 forum posts
169 photos

Yes very nice Harry. Another good looking boat from Taz!


harry smith 104/07/2020 12:35:10
1079 forum posts
1272 photos

Hi Lads

Installing a new brushless motor from 28mm to a 35mm 1250kv 850 Watt on 4S lipo.

Same prop, but with a 60Amp ESC.

It's working great on my Corona Cabin Cruiser.

So I am trying the standardize my setups with motors , props, ESC and batteries .

So 24 to 30" one setup for planning hulls.

Another for over 30 to 40" !!!

As for my displacement hull boats 540 80 Turn rock crawler brush motors on 2S lipo batteries.

Harry Smith

After that TOO BIG !!!

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Boats? Use our magazine locator link to find your nearest stockist!

Find Model Boats!

Support Our Partners
Tony Green Steam
Restorers Wanted
Premier March
Pendle Boilers
Shopping Partners
Social Media

'Like' us on Facebook

Follow us on Twitter

Pin us on Pinterest

Member Contributions
Distributors of Model Boats for our overseas readers

Make sure you never miss out on the latest news, product reviews and competitions with our free RSS feed

Make your own contribution to the Website

We welcome well written contributions from Website members on almost any aspect of Model Boating with a particular emphasis on practical hints, tips, experience and builds.

In order to maintain a consistent standard and format, all suggestions should first be sent to me by Personal Message for approval in principle. Only a very limited amount of time is available for editing contributions into a suitable format for placing on the website so it is important that the material is well presented, lucid and free from obvious spelling errors. I think it goes without saying that contributions should be illustrated by appropriate photos. I shall be happy to give advice on this.

The Member Contribution area offers space for short informative mini articles which would not normally find a place in Model Boats magazine. It is an opportunity for Website Members to freely share their  expertise and experience but I am afraid that virtue is its own reward as there is no budget to offer more material recompense!

I look forward to receiving your suggestions.

Colin Bishop - Website Editor